See trouble-shooting section below for more information One or more codepad lights will illuminate to indicate which of your sensors has a tamper alarm. The alarm system is drawing too much current. Here’s what they mean:ġ – Over-current fault. One or more zone lights on the codepad will light. Press 1 again to drill down to the exact fault. Understanding what the lights and sounds mean will help you to easily operate your system.Press the button on your codepad Zone Light Provide specific information relating to the status of the security system, which is described in the booklet. The LCD keypad includes 4 lights and a 32-character liquid crystal display and a built-in electronic sounder. System must always be disarmed using a 4 or 6 digit code. If your Security Control has been so programmed, you mayīe able to turn on (ARM) your System by simply double pressing the Keypad Control, which is similar to a telephone keypad. The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by entering a 4 or 6 digit code into the If you do not understand any part of this manual you should notify your installing company. Please keep this booklet in an accessible location for the life of the Practice on the keypad control while your professional installer is on site. This manual is furnished to help you understand your security system and become proficient in its operation.Īll users of your security system should read and follow the instructions in this booklet and, if possible,
APPENDIX A – EVENT LOG.25ĪPPENDIX B – REFERENCE TABLES.17ĪDJUSTING THE VIEW/BRIGHTNESS OF THE LCD.18 LIGHT CONTROL FOR X-10 DEVICES (OPTIONAL). 9ĬHANGING MODES WHILE SYSTEM ARMED (OPTIONAL).10ĭISARMING THE SYSTEM.
0 kommentar(er)
